What are the top places to upgrade insulation and why?
The number one place is your attic. It can account for up to 50% of your home's total heat loss. Crawlspaces, floors, and basements are also critical. Heat loss can be as high as 30% and floors can be cold when they are not insulated.

How do I know if I need to add insulation to my Attic?
Check the attic to make sure there is at least 12 inches of insulation. Also, if your insulation is level with or below the joists, you probably need to add more insulation.

What are R-Values?
R-Value is a measure of how well a material blocks the flow of heat. The "R" stands for resistance to heat flow. The higher the R-value, the better the material insulates. The R-value of insulation depends on the type of material, its thickness, and its density. City and county building codes usually require a specific R-value for new home construction and can be a good guide for upgrading existing homes. These codes are related to the
Department of Energy R-Value Recommendations.

What is the difference between Fiberglass and Cellulose Insulation?
Fiberglass Insulation is made from materials that are melted into glass and blown into long, thin strands held together with a binder. It comes in rolls or batts for wall and ceiling insulation or loose fill for wall and attic blow-in. Fiberglass insulation is available in a variety of R-values. Cellulose Insulation is made from recycled newspapers, waste paper, and cardboard. It is only available as loose fill. It is sprayed into walls or attics. R-value is achieved by the thickness or depth of the cellulose.

Should I use Fiberglass or Cellulose Insulation?
Both fiberglass and cellulose are quality insulation products. Each has its own unique advantages. For walls, either loose-fill fiberglass or cellulose can provide a tighter, more complete fit, but costs more than batts or blankets. For attics, both fiberglass and cellulose loose-fill insulation will achieve the same results, and the cost is the same.

How can I make my home tighter, less drafty?
Air leakage through cracks and holes can be responsible for approximately one-third of an average home's heat loss. Cracks and holes hidden in attics, basements, and crawlspaces are big problems that can make your home uncomfortable, waste energy, and cost you money. One of the best dollar-saving techniques to stopping leaks is to caulk all cracks and openings to the outside.

What is an Attic Tent and what purpose does it serve?
An Attic Tent is made with light weight insulation materials that are surrounded by a zippered durable shell. It prevents air loss, thus improving the home's energy efficiency and reducing energy cost. It also keeps out insulation and dust particles which improves a home's air quality.

What are Floor Batts and why are they needed?
Floor Batts are made of fiberglass and are installed under the floor between the floor joists. They prevent heat escaping though the floor in cold weather and prevent heat from entering the home in warm weather. Typically, R-19 batts are used for floor batts.

What is Groundcover and what does it accomplish?
Groundcover is a 6-mil polyethylene sheet used to cover the ground in the crawl space under the home. By using it, ground moisture is contained in the ground. Without it, moisture can soak insulation and collect on the wood structure, causing dry rot and other problems.